32-channel Rack Mixer with Built-in Wi-Fi

Put a Mackie DL32S in your rack, and you can mix from anywhere. All you need is an iPad and Mackie’s Master Fader control app. 32 great-sounding Onyx+ mic preamps and onboard FX ensure a great-sounding performance. The DL32S also functions as a 32-in/32-out USB interface, so you can record the show then mix it later in the studio. You can also play back a full multitrack recording for a virtual sound check. The DL32S supports up to 20 iPads at once, so multiple engineers can work from one mixer. And with built-in Wi-Fi networking and instant recall of every setting, setup is a snap. The DL32S gets you into your mix like never before.

• Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a
• headphone output
• 16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs
• 32 recallable Onyx+ mic preamps deliver top-notch sound
• Wireless mixing allows you to take control of your mix via an iPad
• Tweak your mix, processing, and routing from anywhere in the venue
• Built-in Wi-Fi networking and instant recall ensure easy setup
• Supports up to 20 iPads at once to accommodate multiple engineers
• 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes
• 32-in/32-out USB interface for recording straight to your DAW
• Play intermission music, backing tracks, and more
• Play back your full multitrack recording for a virtual sound check
• Use your DAW’s audio plug-ins in a live environment

Control everything from anywhere with wireless mixing

Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would’ve needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers!

Control everything from anywhere with wireless mixing

Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would’ve needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers!

Control everything from anywhere with wireless mixing

Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would’ve needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers!

Create polished, professional-sounding mixes

Packed with DSP, the Mackie DL32S gives you 32 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 15 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay, reverb, and modulation effects. With four stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem.

A large-format console in the palm of your hand

The Mackie DL32S supplies 32 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie’s Master Fader control app. The DL32S is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you’re serious about live sound, you owe it to yourself to check out the DL32S.

Specifications

Type: Digital Stage Box Mixer
Channels: 32
Inputs – Mic Preamps: 16 x XLR, 14 x XLR-1/4″ combo, 2 x XLR-1/4″ combo (mic/line/Hi-Z)
Outputs – Main: 2 x XLR (L/R, assignable), 8 x XLR (assignable)
Aux Sends: 8 x Stereo Sends
Busses/Groups: 6 x Stereo Sub Groups, 15 x Output Busses, 6 x Mute Groups
Data I/O: 1 x RJ45 (external control)
USB: 1 x Type B
Computer Connectivity: USB (32 x 32), Wi-Fi
Headphones: 1 x 1/4″
EQ Bands: 4-band Parametric EQ, Highpass Filter
Effects: 4 x Stereo FX Processors, Reverb, Delay, Chorus, Flange
Signal Processing: Gate, Compressor
Software: Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10)
Height: 7.3″
Depth: 5.8″
Width: 17.6″
Weight: 8.8 lbs.
Manufacturer Part Number: 2049000-00