DALI SUB K-14F Home Theater Subwoofer

FloatOr as low as R7497.50 / month interest-free, using your existing credit card. How it works

High-Power 14″ Subwoofer for Delightful Movie/Music Audio Reproduction.

  • 1 X 14″ Aluminium Long-Stroke Low-Range Driver.
  • 500 Watts Class D Amplifier.
  • High-Yield Amplifier.
  • Integrated Limiter.
  • Mono, RCS and Stereo Inputs.
  • Medium Density Fibreboard (MDF) Cabinet.
  • Solid Aluminium Base.

Overview:

Whether the task is to fill the room with stereo music or to feel the subtle tremor from a movie soundtrack the new DALI SUB K-14 F will deliver! Build around a 14” aluminium long stroke woofer and with a 500 watts class D amplifier the DALI SUB K-14 F has the power and the control for both impressive movie- and delightful music reproduction. Connect the sub to your amplifier through LFE or line-out, and prepare to be pushed down in your seat.

Amplifier:

Making sure there is enough power to move the large woofer, the 450 watts RMS integrated amplifier has the stamina to keep pushing and the headroom to draw out that little extra when needed. Constructed for lasting effect, it is powered by a switch mode power supply (SWPS) that helps keep the module at a low working temperature. For that reason there is no external heat sink on the SUB K-14 F. Knowing that the SUB K-14 F will find itself working for hours on end, DALI wanted to secure the amplifier against overheating. The built in PTC ensures that even if the SUB K-14 F should become overheated, it will automatically shut down until the temperature is back at operating level and then turn back on. The Class-D amplifier takes an analogue signal, and with an eye on performance and to keep the signal clear and undistorted, an analogue filter is applied. This filter is tuned to maximize the use of the woofer and thereby the output from the SUB K-14 F.

To improve sound reproduction and to avoid excessive distortion at extreme output sound pressure levels, a power limiter has been incorporated in the amplifier signal path. The integrated limiter works by constantly comparing the incoming audio signal to a threshold defining the maximum amplifier output power. If the incoming signal, at a certain volume setting, is about to exceed the maximum amplifier output power the level is automatically limited without introducing audible level differences or pumping artefacts. This is done to avoid clipping of the audio signal that will cause distortion and to prevent the amplifier from being damaged. The limiter is only functional at extreme sound pressure levels. Fitted with controls for gain, cut-off frequency, and phase, the DALI SUB K-14 F will adapt to most front speaker and room acoustics. And, with a choice of LFE and LINE level inputs, it can be connected to almost any amplifier, receiver or processor.

Woofer:

The SUB K-14 F incorporates a 14” woofer with a deep black coloured aluminium cone. Chosen for its stiff, yet lightweight properties, the aluminium cone ensures a greater transient response than you would normally expect from a subwoofer in this category. Very much in line with DALI’s philosophy in building speakers, the ability to start and stop very quickly enables easy integration with the front speakers. Designed to be a closed cone you will find no dust cap. Instead it is an integrated part of the cone itself. This is also a contributing factor in ensuring a piston-like behaviour. Consequently, distortion is kept to an absolute minimum – especially in the low frequency area which is where the subwoofer operates.

The motor of the woofer is built around an ‘oversized’ ferrite magnet, and optimised for maximum flux within the voice coil gap. This carefully designed magnet system enabled the project team to reach a high B/L product to enable the SUB K-14 F to render the finer low frequency details of music, but also at a higher sound pressure level. The measured BxL value of 17 N/A is a good indication of the level of control and precision that was reached, and rarely to be found in this category at all. Numerous listening sessions has truly convinced us that this was indeed the right way to go. The 30 mm long, 4 layer voice coil is built for long excursions. It is vented to ensure air cooling to the system and to the coil itself, keeping the temperature down, which creates a stable bass response.

Also, the pole piece is vented for maximum cooling. The venting here has another purpose though; it reduces internal compression in the motor system, which ensures free movement of the cone without any over-/underpressure affecting the performance. Adhering to the low-loss sound design principle, the surround of the woofer is built to allow long and linear excursion. The oversized suspension is designed to allow both weak and strong transients to turn into undistorted acoustic signals.

Cabinet:

Cleverly designed, the SUB K-14 F is a big subwoofer, but with a non intrusive design. The 14” woofer reaches almost to the edge of the elegant looking high gloss front baffle, giving the appearance of a large woofer and small cabinet. Built from solid MDF, the 430 x 395 x 425 mm cabinet abides to the tough DALI specifications, and gives the woofer an impressive 44 litres to work within. The entire cabinet is effectively decoupled from the floor by means of a sleek aluminium base. Almost appearing to hover above the floor, the distance of 50 mm eliminates any potential turbulence from the space between the cabinet and the floor itself. Still, the proximity to the floor ensures that the benefit of having a downward-firing port is maintained; a higher efficiency and more freedom in positioning.

High-Power 14″ Subwoofer for Delightful Movie/Music Audio Reproduction.

  • 1 X 14″ Aluminium Long-Stroke Low-Range Driver.
  • 500 Watts Class D Amplifier.
  • High-Yield Amplifier.
  • Integrated Limiter.
  • Mono, RCS and Stereo Inputs.
  • Medium Density Fibreboard (MDF) Cabinet.
  • Solid Aluminium Base.

Overview:

Whether the task is to fill the room with stereo music or to feel the subtle tremor from a movie soundtrack the new DALI SUB K-14 F will deliver! Build around a 14” aluminium long stroke woofer and with a 500 watts class D amplifier the DALI SUB K-14 F has the power and the control for both impressive movie- and delightful music reproduction. Connect the sub to your amplifier through LFE or line-out, and prepare to be pushed down in your seat.

Amplifier:

Making sure there is enough power to move the large woofer, the 450 watts RMS integrated amplifier has the stamina to keep pushing and the headroom to draw out that little extra when needed. Constructed for lasting effect, it is powered by a switch mode power supply (SWPS) that helps keep the module at a low working temperature. For that reason there is no external heat sink on the SUB K-14 F. Knowing that the SUB K-14 F will find itself working for hours on end, DALI wanted to secure the amplifier against overheating. The built in PTC ensures that even if the SUB K-14 F should become overheated, it will automatically shut down until the temperature is back at operating level and then turn back on. The Class-D amplifier takes an analogue signal, and with an eye on performance and to keep the signal clear and undistorted, an analogue filter is applied. This filter is tuned to maximize the use of the woofer and thereby the output from the SUB K-14 F.

To improve sound reproduction and to avoid excessive distortion at extreme output sound pressure levels, a power limiter has been incorporated in the amplifier signal path. The integrated limiter works by constantly comparing the incoming audio signal to a threshold defining the maximum amplifier output power. If the incoming signal, at a certain volume setting, is about to exceed the maximum amplifier output power the level is automatically limited without introducing audible level differences or pumping artefacts. This is done to avoid clipping of the audio signal that will cause distortion and to prevent the amplifier from being damaged. The limiter is only functional at extreme sound pressure levels. Fitted with controls for gain, cut-off frequency, and phase, the DALI SUB K-14 F will adapt to most front speaker and room acoustics. And, with a choice of LFE and LINE level inputs, it can be connected to almost any amplifier, receiver or processor.

Woofer:

The SUB K-14 F incorporates a 14” woofer with a deep black coloured aluminium cone. Chosen for its stiff, yet lightweight properties, the aluminium cone ensures a greater transient response than you would normally expect from a subwoofer in this category. Very much in line with DALI’s philosophy in building speakers, the ability to start and stop very quickly enables easy integration with the front speakers. Designed to be a closed cone you will find no dust cap. Instead it is an integrated part of the cone itself. This is also a contributing factor in ensuring a piston-like behaviour. Consequently, distortion is kept to an absolute minimum – especially in the low frequency area which is where the subwoofer operates.

The motor of the woofer is built around an ‘oversized’ ferrite magnet, and optimised for maximum flux within the voice coil gap. This carefully designed magnet system enabled the project team to reach a high B/L product to enable the SUB K-14 F to render the finer low frequency details of music, but also at a higher sound pressure level. The measured BxL value of 17 N/A is a good indication of the level of control and precision that was reached, and rarely to be found in this category at all. Numerous listening sessions has truly convinced us that this was indeed the right way to go. The 30 mm long, 4 layer voice coil is built for long excursions. It is vented to ensure air cooling to the system and to the coil itself, keeping the temperature down, which creates a stable bass response.

Also, the pole piece is vented for maximum cooling. The venting here has another purpose though; it reduces internal compression in the motor system, which ensures free movement of the cone without any over-/underpressure affecting the performance. Adhering to the low-loss sound design principle, the surround of the woofer is built to allow long and linear excursion. The oversized suspension is designed to allow both weak and strong transients to turn into undistorted acoustic signals.

Cabinet:

Cleverly designed, the SUB K-14 F is a big subwoofer, but with a non intrusive design. The 14” woofer reaches almost to the edge of the elegant looking high gloss front baffle, giving the appearance of a large woofer and small cabinet. Built from solid MDF, the 430 x 395 x 425 mm cabinet abides to the tough DALI specifications, and gives the woofer an impressive 44 litres to work within. The entire cabinet is effectively decoupled from the floor by means of a sleek aluminium base. Almost appearing to hover above the floor, the distance of 50 mm eliminates any potential turbulence from the space between the cabinet and the floor itself. Still, the proximity to the floor ensures that the benefit of having a downward-firing port is maintained; a higher efficiency and more freedom in positioning.

Information

Shipping
We offer free shipping nationwide on all orders over R1000. We endeavour to deliver within 3-7 working days. 

Return & exchange
If you are not satisfied with your purchase you can return it to us within 7 days for an exchange or refund. More info.

Stock Availability
Not all stock advertised on our site is necessarily available at our retail outlet. Most stock is kept at our warehouse for dispatch purposes. Should you wish to collect your order, or make your purchase at our store, please enquire first.

Should the product you have ordered not be available, ICONS will endeavour to offer you an equivalent, or an upgrade where possible. Should we be unable to do so, Icons will refund your purchase.

Assistance
Contact us on 010 822 9370, or email us at teamicons@iconsshop.co.za.

Upc barcode

5703120107776

Brand

Colour

Black, White

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DALI SUB K-14F Home Theater Subwoofer

R29990.00

SHOPPING CART 0

RECENTLY VIEWED 0

Buy Big. Pay Small – with Interest-free monthly installments.

Get your purchase today and use the available limit on your credit card to pay in interest-free, fee-free monthly installments. No interest or fees. Not even late fees, ever. It’s your credit already, so there are absolutely no applications or credit checks. The cherry on top? You continue to earn your reward points. It’s like a budget facility, but interest-free.

  • Enjoy now. Pay over time.
  • No applications. No credit checks.
  • Zero interest. Zero fees.

How does Float Work?

  1. Select Float as your payment method at checkout
  2. Choose your number of instalments
  3. Enter your card details and Float it!

* This link will direct you to Float’s website

Mobicred is a simple and convenient revolving credit facility that allows you to safely shop online with participating online stores in South Africa. Your Mobicred account allows you to make one single monthly payment for all your online spend.

What are the requirements?

  • To open an account, you’ll need to meet the following criteria:
  • Have a valid South African ID number.
  • Have an existing valid bank account, a valid email address and a RICA’d mobile number.
  • Be at least 18 years of age.
  • Earn a minimum monthly salary of R5,500. – You may need to submit 3 months most recent bank statements or payslips.

How do I pay with Mobicred?
Simply select Mobicred as a payment option within the checkout process, and login with your Mobicred account details. Mobicred will credit ICONS and your order will be fulfilled.

How to apply?
You can apply for Mobicred financing by following the link on our product pages, or with the button below*.

Need more info?
021 126 0700
060 762 8284
customerservice@mobicred.co.za

* Please note that this link will direct you to Mobicred’s online portal. ICONS does not handle the application process – all related queries should be directed to Mobicred’s support team.

Business Financing

If you’re looking to finance your purchase in your business’ name, ICONS works closely with The Rental CO – a third party finance broker that finds you the best interest rate available. At roughly R2,500 monthly repayment per R100,000 capital (over 60 months), this is a great rent-to-buy option to consider.

How it works: Fill out the form below, and we’ll put a Rental Co agent directly in touch with you. They will work with you to process your finance application. The process moves quickly once they have received all relevant documents from you.

Not all stock advertised on our site is necessarily available at our retail outlet. Most stock is kept at our warehouse for dispatch purposes. Should you wish to collect your order, or make your purchase at our store, please enquire first.

Delivery

For orders to be shipped, we will deliver within 7 working days, or sooner if possible. Should we expect a delay for any reason, one of our sales representatives will contact you with details.

For orders to be collected, you will be contacted once the stock has been received from our warehouse.

Stock Availability

Please note that at any given time, ICONS holds a large inventory of goods across all categories on our website.

Due to Covid-19 the manufacturing, logistics and supply of goods globally has been inconsistent. However, stock is arriving at our warehouse on a weekly basis and your order will be supplied as soon as possible.

Should the product you have ordered not be available, ICONS will endeavour to offer you an equivalent, or an upgrade where possible. Should we be unable to do so, Icons will refund your purchase.

In Store Collections

For urgent orders, or to confirm stock availability and get a delivery ETA, please be in touch with a sales rep by contacting us on 0108229370 using our live chat feature

Product Inquiry

Want more info on stock availability? Found it Cheaper? Can’t find what you’re looking for? Get in touch or fill in the inquiry form and we’ll happily assist!

ICONS AV specialises in integrating audio-visual technologies into homes, offices, venues & houses of worship; Elevating our clients’ relationship with with the digital world around them.

GET IN TOUCH

ICONS Showroom
Unit 4, Design on Appel,
14 Appel Road, Kramerville, Sandton, 2090

Sales / Order Enquiries
Phone: +27 10 822 9370
teamicons@iconsshop.co.za

Business Hours
Mon-Fri: 08h30 – 17h00
Saturday: 08h30 – 14h00
Public Hols: 08h30 – 13h00

AV Project Enquiries
Phone: +27 10 822 9373
enquiries@iconsav.co.za

Saturday Saver!

Strumming up some weekend fun! 🎸🥁 Get ready for our Strings ‘n Sticks #SaturdaySaver promo! HALF PRICE on ALL guitar strings and drum sticks, plus a FREE restring and a cup of coffee! 🎶🔥

Don’t miss out!

In-store only | Every Saturday 💥

Added to wishlist! VIEW WISHLIST