DALI SUB E-12F Home Theater Subwoofer

FloatOr as low as R3872.50 / month interest-free, using your existing credit card. How it works

Powerful, Elegant 12″ Subwoofer for Well-Balanced Bass Reproduction.

  • 1 X 12″ Long-Stroke Low-Range Driver.
  • 170 Watts Continuous Power.
  • Pure Aluminium Cone.
  • High-Yield Amplifier.
  • Integrated Limiter.
  • Mono, RCS and Stereo Inputs.
  • Medium Density Fibreboard (MDF) Cabinet.
  • Aluminium Base.

Overview:

The launch of the DALI SUB E-12 F marks a new stage of what is possible at this level of subwoofers. The SUB E-12 features a 12” woofer, capable of moving plenty of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior. Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier! The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, well-balanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.

The back plate of SUB E-12 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up. The DALI SUB E-12 F is recommended as compliment to the OPTICON, ZENSOR and SPEKTOR series and is compatible with all DALI loudspeakers as the perfect completion of a DALI surround set up.

Amplifier:

The integrated 170 Watt RMS Class D amplifier is a highly linear construction. The DALI SUB E-12 F will follow and render the required signal with an absolute minimum of bias. Designed not only for continuous power, but also for peak power, this subwoofer is able to deliver 220 Watt Peak Power. This is very relevant when it comes to both movie and music signals. Switchmode power supply is part of the reason for very low power consumption – only 0.4 Watt in stand-by mode. And the amplifier displays an impressive efficiency of 70%. In unison the high efficiency amplifier section and power supply construction generate an absolute minimum of heat loss. For that reason you will find no external heat sink on this subwoofer.

To improve sound reproduction in general, and to ensure that this subwoofer is able to perform under difficult circumstances, a limiter has been incorporated in the amplifier section. The integrated limiter works in two areas: It compares the input signal amplitude to the potential output signal level, and it compares the available supply voltage from the power supply to the expected output signal. If any of these comparisons show that there will be a problem then the limiter will cut the signal in a soft manner and without affecting peak power. Fitted with controls for gain, cut-off frequency, and phase, the DALI SUB E-12 F will adapt to any front speaker and room acoustics. And with a choice of LFE and LINE inputs it can be connected to almost any amplifier, receiver or processor.

Woofer:

The DALI SUB E-12 F incorporates a large woofer with aluminium cone. This stiff, yet lightweight, material was chosen to ensure a greater transient response as you would normally expect from a subwoofer in this category. Very much in line with DALI’s philosophy in building speakers, the ability to start and stop very quickly enables easy integration with the front speakers. This goes for smaller front speakers as well.  Designed to be a closed cone you will find no dust cap. Instead it is an integrated part of the cone itself. This is also a contributing factor in ensuring a piston-like behaviour. Consequently distortion is kept to an absolute minimum – especially in the low frequency area which is where the subwoofer operates.

The engine of the woofer is built around an ‘oversized’ ferrite magnet, and optimized for maximum flux within the voice coil gap. The reason is that it was crucial for the project team to reach a high B/L product to enable the SUB E-12 F to render the finer low frequency details of music, also at a higher sound pressure level. The measured B/L value of 14 N/Ampere is a good indication of the level of control and precision that was reached, and rarely to be found in this category at all. Adhering to the low-loss sound design principle, the surround of the woofer is built to allow long and linear excursion. The oversized suspension is designed to allow both weak and strong transients to turn into undistorted acoustic signals.

Cabinet:

Built on almost 30 years of knowledge in acoustics and cabinets, the solid MDF cabinet abides the tough DALI specifications. Any risk of port noise derived from the down-firing bass vent itself is seriously reduced by its convex tapered design. Apart from the shape of the flares the vent has also undergone extensive testing, measuring and listening when it comes to dimensions and placement, in order to optimize interaction with the cabinet and woofer. The entire cabinet is effectively decoupled from the floor by means of a sleek aluminium base. Almost appearing to hover above the floor the distance of 30 mm eliminates any potential turbulence from the space between the cabinet and the floor itself. Still, the proximity to the floor ensures that the benefit of having a down-firing vent is maintained; a higher efficiency and more freedom in positioning – e.g. directly against the wall. The front grille is mounted by magnets only – and when removed, the visual appearance changes from discreet to extravagant as the pure aluminium cone is revealed.

Powerful, Elegant 12″ Subwoofer for Well-Balanced Bass Reproduction.

  • 1 X 12″ Long-Stroke Low-Range Driver.
  • 170 Watts Continuous Power.
  • Pure Aluminium Cone.
  • High-Yield Amplifier.
  • Integrated Limiter.
  • Mono, RCS and Stereo Inputs.
  • Medium Density Fibreboard (MDF) Cabinet.
  • Aluminium Base.

Overview:

The launch of the DALI SUB E-12 F marks a new stage of what is possible at this level of subwoofers. The SUB E-12 features a 12” woofer, capable of moving plenty of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior. Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier! The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, well-balanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.

The back plate of SUB E-12 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up. The DALI SUB E-12 F is recommended as compliment to the OPTICON, ZENSOR and SPEKTOR series and is compatible with all DALI loudspeakers as the perfect completion of a DALI surround set up.

Amplifier:

The integrated 170 Watt RMS Class D amplifier is a highly linear construction. The DALI SUB E-12 F will follow and render the required signal with an absolute minimum of bias. Designed not only for continuous power, but also for peak power, this subwoofer is able to deliver 220 Watt Peak Power. This is very relevant when it comes to both movie and music signals. Switchmode power supply is part of the reason for very low power consumption – only 0.4 Watt in stand-by mode. And the amplifier displays an impressive efficiency of 70%. In unison the high efficiency amplifier section and power supply construction generate an absolute minimum of heat loss. For that reason you will find no external heat sink on this subwoofer.

To improve sound reproduction in general, and to ensure that this subwoofer is able to perform under difficult circumstances, a limiter has been incorporated in the amplifier section. The integrated limiter works in two areas: It compares the input signal amplitude to the potential output signal level, and it compares the available supply voltage from the power supply to the expected output signal. If any of these comparisons show that there will be a problem then the limiter will cut the signal in a soft manner and without affecting peak power. Fitted with controls for gain, cut-off frequency, and phase, the DALI SUB E-12 F will adapt to any front speaker and room acoustics. And with a choice of LFE and LINE inputs it can be connected to almost any amplifier, receiver or processor.

Woofer:

The DALI SUB E-12 F incorporates a large woofer with aluminium cone. This stiff, yet lightweight, material was chosen to ensure a greater transient response as you would normally expect from a subwoofer in this category. Very much in line with DALI’s philosophy in building speakers, the ability to start and stop very quickly enables easy integration with the front speakers. This goes for smaller front speakers as well.  Designed to be a closed cone you will find no dust cap. Instead it is an integrated part of the cone itself. This is also a contributing factor in ensuring a piston-like behaviour. Consequently distortion is kept to an absolute minimum – especially in the low frequency area which is where the subwoofer operates.

The engine of the woofer is built around an ‘oversized’ ferrite magnet, and optimized for maximum flux within the voice coil gap. The reason is that it was crucial for the project team to reach a high B/L product to enable the SUB E-12 F to render the finer low frequency details of music, also at a higher sound pressure level. The measured B/L value of 14 N/Ampere is a good indication of the level of control and precision that was reached, and rarely to be found in this category at all. Adhering to the low-loss sound design principle, the surround of the woofer is built to allow long and linear excursion. The oversized suspension is designed to allow both weak and strong transients to turn into undistorted acoustic signals.

Cabinet:

Built on almost 30 years of knowledge in acoustics and cabinets, the solid MDF cabinet abides the tough DALI specifications. Any risk of port noise derived from the down-firing bass vent itself is seriously reduced by its convex tapered design. Apart from the shape of the flares the vent has also undergone extensive testing, measuring and listening when it comes to dimensions and placement, in order to optimize interaction with the cabinet and woofer. The entire cabinet is effectively decoupled from the floor by means of a sleek aluminium base. Almost appearing to hover above the floor the distance of 30 mm eliminates any potential turbulence from the space between the cabinet and the floor itself. Still, the proximity to the floor ensures that the benefit of having a down-firing vent is maintained; a higher efficiency and more freedom in positioning – e.g. directly against the wall. The front grille is mounted by magnets only – and when removed, the visual appearance changes from discreet to extravagant as the pure aluminium cone is revealed.

Information

Shipping
We offer free shipping nationwide on all orders over R1000. We endeavour to deliver within 3-7 working days. 

Return & exchange
If you are not satisfied with your purchase you can return it to us within 7 days for an exchange or refund. More info.

Stock Availability
Not all stock advertised on our site is necessarily available at our retail outlet. Most stock is kept at our warehouse for dispatch purposes. Should you wish to collect your order, or make your purchase at our store, please enquire first.

Should the product you have ordered not be available, ICONS will endeavour to offer you an equivalent, or an upgrade where possible. Should we be unable to do so, Icons will refund your purchase.

Assistance
Contact us on 010 822 9370, or email us at teamicons@iconsshop.co.za.

Upc barcode

5703120106342

Brand

Colour

Black, White

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DALI SUB E-12F Home Theater Subwoofer

R15490.00

SHOPPING CART 0

RECENTLY VIEWED 0

Buy Big. Pay Small – with Interest-free monthly installments.

Get your purchase today and use the available limit on your credit card to pay in interest-free, fee-free monthly installments. No interest or fees. Not even late fees, ever. It’s your credit already, so there are absolutely no applications or credit checks. The cherry on top? You continue to earn your reward points. It’s like a budget facility, but interest-free.

  • Enjoy now. Pay over time.
  • No applications. No credit checks.
  • Zero interest. Zero fees.

How does Float Work?

  1. Select Float as your payment method at checkout
  2. Choose your number of instalments
  3. Enter your card details and Float it!

* This link will direct you to Float’s website

Mobicred is a simple and convenient revolving credit facility that allows you to safely shop online with participating online stores in South Africa. Your Mobicred account allows you to make one single monthly payment for all your online spend.

What are the requirements?

  • To open an account, you’ll need to meet the following criteria:
  • Have a valid South African ID number.
  • Have an existing valid bank account, a valid email address and a RICA’d mobile number.
  • Be at least 18 years of age.
  • Earn a minimum monthly salary of R5,500. – You may need to submit 3 months most recent bank statements or payslips.

How do I pay with Mobicred?
Simply select Mobicred as a payment option within the checkout process, and login with your Mobicred account details. Mobicred will credit ICONS and your order will be fulfilled.

How to apply?
You can apply for Mobicred financing by following the link on our product pages, or with the button below*.

Need more info?
021 126 0700
060 762 8284
customerservice@mobicred.co.za

* Please note that this link will direct you to Mobicred’s online portal. ICONS does not handle the application process – all related queries should be directed to Mobicred’s support team.

Business Financing

If you’re looking to finance your purchase in your business’ name, ICONS works closely with The Rental CO – a third party finance broker that finds you the best interest rate available. At roughly R2,500 monthly repayment per R100,000 capital (over 60 months), this is a great rent-to-buy option to consider.

How it works: Fill out the form below, and we’ll put a Rental Co agent directly in touch with you. They will work with you to process your finance application. The process moves quickly once they have received all relevant documents from you.

Not all stock advertised on our site is necessarily available at our retail outlet. Most stock is kept at our warehouse for dispatch purposes. Should you wish to collect your order, or make your purchase at our store, please enquire first.

Delivery

For orders to be shipped, we will deliver within 7 working days, or sooner if possible. Should we expect a delay for any reason, one of our sales representatives will contact you with details.

For orders to be collected, you will be contacted once the stock has been received from our warehouse.

Stock Availability

Please note that at any given time, ICONS holds a large inventory of goods across all categories on our website.

Due to Covid-19 the manufacturing, logistics and supply of goods globally has been inconsistent. However, stock is arriving at our warehouse on a weekly basis and your order will be supplied as soon as possible.

Should the product you have ordered not be available, ICONS will endeavour to offer you an equivalent, or an upgrade where possible. Should we be unable to do so, Icons will refund your purchase.

In Store Collections

For urgent orders, or to confirm stock availability and get a delivery ETA, please be in touch with a sales rep by contacting us on 0108229370 using our live chat feature

Product Inquiry

Want more info on stock availability? Found it Cheaper? Can’t find what you’re looking for? Get in touch or fill in the inquiry form and we’ll happily assist!

ICONS AV specialises in integrating audio-visual technologies into homes, offices, venues & houses of worship; Elevating our clients’ relationship with with the digital world around them.

GET IN TOUCH

ICONS Showroom
Unit 4, Design on Appel,
14 Appel Road, Kramerville, Sandton, 2090

Sales / Order Enquiries
Phone: +27 10 822 9370
teamicons@iconsshop.co.za

Business Hours
Mon-Fri: 08h30 – 17h00
Saturday: 08h30 – 14h00
Public Hols: 08h30 – 13h00

AV Project Enquiries
Phone: +27 10 822 9373
enquiries@iconsav.co.za

Saturday Saver!

Strumming up some weekend fun! 🎸🥁 Get ready for our Strings ‘n Sticks #SaturdaySaver promo! HALF PRICE on ALL guitar strings and drum sticks, plus a FREE restring and a cup of coffee! 🎶🔥

Don’t miss out!

In-store only | Every Saturday 💥

Added to wishlist! VIEW WISHLIST