DALI Spektor 6 Floor-Standing Speaker (Pair)

FloatOr as low as R3750.00 / month interest-free, using your existing credit card. How it works

Detailed, Dynamic and Powerful Floor-Standing Speaker for Any Stereo or Surround Setup.

  • 6½” Woofers
  • 25mm Soft Dome Tweeter
  • 30-150 Watts
  • Bass Reflex Enclosure
  • Wood Fiber Cones
  • Amplifier Friendly
  • Low Signal Loss

Built around two 6½” woofers and a 25 mm soft dome tweeter, this large floorstanding speaker is the power-house of the SPEKTOR family.  Getting this much Hi-Fi performance from a speaker in this price range not only took all of DALI’s experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.

The DALI SPEKTOR 6, like all DALI loudspeakers, has been designed in accordance with fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience.

Wide Dispersion 

DALI makes it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the SPEKTOR 6 have been selected to achieve a wide dispersion pattern. You will experience a well-integrated sound, even when listening significantly off-axis. And, as you are often not seated directly in front of the loudspeaker when listening to music, this is important. Optimizing the audio signal for off-axis distribution results in the signal reaching your ear directly and the signal reflected off the room surfaces, to have a coherent balance. This means a consistent high sound quality across a much wider listening area. At the same time, it offers greater freedom and flexibility in positioning the loudspeakers. An added benefit is hugely reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed for toeing-in.

Tweeter

The SPEKTOR 6 tweeter is able to render high frequencies with high accuracy. This means very short excursions, but at high speed, – or rather – with high acceleration. In other words, it features a low moving mass and a strong motor. The tweeter used in the SPEKTOR 6 is based on an ultra-light weight weaved fabric. Compared to most soft dome tweeters in the market, the DALI dome material is less than half the weight; 0.056 mg per mm2. The beauty of the soft dome tweeter is its impressive ability to play even the lowest parts of the high frequency range without any break-ups. This is crucial when handling the all important hand-over from the woofer to the tweeter. Not having to push either the woofer or tweeter beyond what they do best results in a seamless transition and preservation of every detail in the mid-range frequencies.

Low Loss

The primary function of any loudspeaker is to convert the electrical signal from the amplifier into a realistic audio experience in the listening room. Any distortion or coloration of the original signal by drivers or enclosures is by definition a degradation of the sound. Clarity in an audio signal is obtained by low loss of information in combination with creating a smooth and seamless reproduction in both the time and frequency domain.

By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover out of quality components which ensures that the signal loss is close to zero. Another fundamental is the lowering of mechanical distortion. This to make sure that the connected amplifier will not be exposed to a larger than necessary challenge, causing loss of detail in the signal even before it has the chance to reach the loudspeaker.  Through very low mechanical loss, the most fragile sound details, even at very low listening levels, are preserved. This is the only way to obtain the sensation of ultimate transparency and “liveliness” from reproduced loudspeaker sound.

Tech Specs:

Product series SPEKTOR
Frequency Range (+/-3 dB) [Hz] 43 – 26,000 Hz
Sensitivity (2,83 V/1 m) [dB] 88.5 dB
Nominal Impedance [ohms] 6 ohms
Maximum SPL [dB] 109 dB
Recommended Amplifier Power [W] 30 – 150 Watt
Crossover Frequency [Hz] 2,500 Hz
Crossover Principle 2-way
High frequency driver, Quantity 1 x 25 mm
High frequency driver, Diaphragm type Soft Textile Dome
Low frequency driver, Quantity 2 x 6,5″
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 41.0 Hz
Connection Input Single Wire
Recommended Placement Floor
Recommended Distance From Wall [cm] 20 – 100 cm
Dimensions (HxWxD) [mm] 972 x 195 x 313 mm
Accessories Included Spikes
Rubber Feet
Manual
Weight [kg] 13.8 kg

Detailed, Dynamic and Powerful Floor-Standing Speaker for Any Stereo or Surround Setup.

  • 6½” Woofers
  • 25mm Soft Dome Tweeter
  • 30-150 Watts
  • Bass Reflex Enclosure
  • Wood Fiber Cones
  • Amplifier Friendly
  • Low Signal Loss

Built around two 6½” woofers and a 25 mm soft dome tweeter, this large floorstanding speaker is the power-house of the SPEKTOR family.  Getting this much Hi-Fi performance from a speaker in this price range not only took all of DALI’s experience and know-how, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.

The DALI SPEKTOR 6, like all DALI loudspeakers, has been designed in accordance with fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience.

Wide Dispersion 

DALI makes it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the SPEKTOR 6 have been selected to achieve a wide dispersion pattern. You will experience a well-integrated sound, even when listening significantly off-axis. And, as you are often not seated directly in front of the loudspeaker when listening to music, this is important. Optimizing the audio signal for off-axis distribution results in the signal reaching your ear directly and the signal reflected off the room surfaces, to have a coherent balance. This means a consistent high sound quality across a much wider listening area. At the same time, it offers greater freedom and flexibility in positioning the loudspeakers. An added benefit is hugely reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed for toeing-in.

Tweeter

The SPEKTOR 6 tweeter is able to render high frequencies with high accuracy. This means very short excursions, but at high speed, – or rather – with high acceleration. In other words, it features a low moving mass and a strong motor. The tweeter used in the SPEKTOR 6 is based on an ultra-light weight weaved fabric. Compared to most soft dome tweeters in the market, the DALI dome material is less than half the weight; 0.056 mg per mm2. The beauty of the soft dome tweeter is its impressive ability to play even the lowest parts of the high frequency range without any break-ups. This is crucial when handling the all important hand-over from the woofer to the tweeter. Not having to push either the woofer or tweeter beyond what they do best results in a seamless transition and preservation of every detail in the mid-range frequencies.

Low Loss

The primary function of any loudspeaker is to convert the electrical signal from the amplifier into a realistic audio experience in the listening room. Any distortion or coloration of the original signal by drivers or enclosures is by definition a degradation of the sound. Clarity in an audio signal is obtained by low loss of information in combination with creating a smooth and seamless reproduction in both the time and frequency domain.

By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover out of quality components which ensures that the signal loss is close to zero. Another fundamental is the lowering of mechanical distortion. This to make sure that the connected amplifier will not be exposed to a larger than necessary challenge, causing loss of detail in the signal even before it has the chance to reach the loudspeaker.  Through very low mechanical loss, the most fragile sound details, even at very low listening levels, are preserved. This is the only way to obtain the sensation of ultimate transparency and “liveliness” from reproduced loudspeaker sound.

Tech Specs:

Product series SPEKTOR
Frequency Range (+/-3 dB) [Hz] 43 – 26,000 Hz
Sensitivity (2,83 V/1 m) [dB] 88.5 dB
Nominal Impedance [ohms] 6 ohms
Maximum SPL [dB] 109 dB
Recommended Amplifier Power [W] 30 – 150 Watt
Crossover Frequency [Hz] 2,500 Hz
Crossover Principle 2-way
High frequency driver, Quantity 1 x 25 mm
High frequency driver, Diaphragm type Soft Textile Dome
Low frequency driver, Quantity 2 x 6,5″
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 41.0 Hz
Connection Input Single Wire
Recommended Placement Floor
Recommended Distance From Wall [cm] 20 – 100 cm
Dimensions (HxWxD) [mm] 972 x 195 x 313 mm
Accessories Included Spikes
Rubber Feet
Manual
Weight [kg] 13.8 kg

Information

Shipping
We offer free shipping nationwide on all orders over R1000. We endeavour to deliver within 3-7 working days. 

Return & exchange
If you are not satisfied with your purchase you can return it to us within 7 days for an exchange or refund. More info.

Stock Availability
Not all stock advertised on our site is necessarily available at our retail outlet. Most stock is kept at our warehouse for dispatch purposes. Should you wish to collect your order, or make your purchase at our store, please enquire first.

Should the product you have ordered not be available, ICONS will endeavour to offer you an equivalent, or an upgrade where possible. Should we be unable to do so, Icons will refund your purchase.

Assistance
Contact us on 010 822 9370, or email us at teamicons@iconsshop.co.za.

Upc barcode

5703120109060

Brand

Colour

Black, Walnut, White

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DALI Spektor 6 Floor-Standing Speaker (Pair)

R15000.00

SHOPPING CART 0

RECENTLY VIEWED 0

Buy Big. Pay Small – with Interest-free monthly installments.

Get your purchase today and use the available limit on your credit card to pay in interest-free, fee-free monthly installments. No interest or fees. Not even late fees, ever. It’s your credit already, so there are absolutely no applications or credit checks. The cherry on top? You continue to earn your reward points. It’s like a budget facility, but interest-free.

  • Enjoy now. Pay over time.
  • No applications. No credit checks.
  • Zero interest. Zero fees.

How does Float Work?

  1. Select Float as your payment method at checkout
  2. Choose your number of instalments
  3. Enter your card details and Float it!

* This link will direct you to Float’s website

Mobicred is a simple and convenient revolving credit facility that allows you to safely shop online with participating online stores in South Africa. Your Mobicred account allows you to make one single monthly payment for all your online spend.

What are the requirements?

  • To open an account, you’ll need to meet the following criteria:
  • Have a valid South African ID number.
  • Have an existing valid bank account, a valid email address and a RICA’d mobile number.
  • Be at least 18 years of age.
  • Earn a minimum monthly salary of R5,500. – You may need to submit 3 months most recent bank statements or payslips.

How do I pay with Mobicred?
Simply select Mobicred as a payment option within the checkout process, and login with your Mobicred account details. Mobicred will credit ICONS and your order will be fulfilled.

How to apply?
You can apply for Mobicred financing by following the link on our product pages, or with the button below*.

Need more info?
021 126 0700
060 762 8284
customerservice@mobicred.co.za

* Please note that this link will direct you to Mobicred’s online portal. ICONS does not handle the application process – all related queries should be directed to Mobicred’s support team.

Business Financing

If you’re looking to finance your purchase in your business’ name, ICONS works closely with The Rental CO – a third party finance broker that finds you the best interest rate available. At roughly R2,500 monthly repayment per R100,000 capital (over 60 months), this is a great rent-to-buy option to consider.

How it works: Fill out the form below, and we’ll put a Rental Co agent directly in touch with you. They will work with you to process your finance application. The process moves quickly once they have received all relevant documents from you.

Not all stock advertised on our site is necessarily available at our retail outlet. Most stock is kept at our warehouse for dispatch purposes. Should you wish to collect your order, or make your purchase at our store, please enquire first.

Delivery

For orders to be shipped, we will deliver within 7 working days, or sooner if possible. Should we expect a delay for any reason, one of our sales representatives will contact you with details.

For orders to be collected, you will be contacted once the stock has been received from our warehouse.

Stock Availability

Please note that at any given time, ICONS holds a large inventory of goods across all categories on our website.

Due to Covid-19 the manufacturing, logistics and supply of goods globally has been inconsistent. However, stock is arriving at our warehouse on a weekly basis and your order will be supplied as soon as possible.

Should the product you have ordered not be available, ICONS will endeavour to offer you an equivalent, or an upgrade where possible. Should we be unable to do so, Icons will refund your purchase.

In Store Collections

For urgent orders, or to confirm stock availability and get a delivery ETA, please be in touch with a sales rep by contacting us on 0108229370 using our live chat feature

Product Inquiry

Want more info on stock availability? Found it Cheaper? Can’t find what you’re looking for? Get in touch or fill in the inquiry form and we’ll happily assist!

ICONS AV specialises in integrating audio-visual technologies into homes, offices, venues & houses of worship; Elevating our clients’ relationship with with the digital world around them.

GET IN TOUCH

ICONS Showroom
Unit 4, Design on Appel,
14 Appel Road, Kramerville, Sandton, 2090

Sales / Order Enquiries
Phone: +27 10 822 9370
teamicons@iconsshop.co.za

Business Hours
Mon-Fri: 08h30 – 17h00
Saturday: 08h30 – 14h00
Public Hols: 08h30 – 13h00

AV Project Enquiries
Phone: +27 10 822 9373
enquiries@iconsav.co.za

Saturday Saver!

Strumming up some weekend fun! 🎸🥁 Get ready for our Strings ‘n Sticks #SaturdaySaver promo! HALF PRICE on ALL guitar strings and drum sticks, plus a FREE restring and a cup of coffee! 🎶🔥

Don’t miss out!

In-store only | Every Saturday 💥

Added to wishlist! VIEW WISHLIST